24/7 Emergency Support

Geothermal Heating and Cooling in Portland, Oregon

Geothermal System

Geothermal heating and cooling in Portland, Oregon, is an energy-saving option for your residence.

Similar to heat pumps, a geothermal system transports warmth from one part of the house to another. It makes use of an underground loop system to transfer heat from the land to your home.

This geothermal heating and cooling system uses the earth’s stored energy, which can convert into major savings on your heating and cooling expenses.

As opposed to conventional heating systems, the EPA states those owning a home using geothermal heat pumps can save 70% on heating and up to 50% on cooling your house each year. This indicates you could possibly save between $400 to $1,500 every year, which could help your geothermal heating and cooling system cover the expense in just a couple of years.

A brand new geothermal system may also cause you to become eligible for energy refunds.

Give our pros a a ring at 503-213-4433 and we’ll help you design the correct system for your house.

CALL TODAY 503-213-4433

8 Advantages of Getting Geothermal Energy

Geothermal heating and cooling units are quite energy efficient and could possibly operate much longer as conventional systems. Here’s a few other advantages to installing one of these systems at your house:

savings icon

1. Utility Savings

Nearly all units are just about three times more effective than fossil fuel systems. The Environmental Protection Agency has calculated geothermal has the potential to save you close to $1,500 every 12 months. These funds could help the geothermal heating and cooling system pay for itself in only a couple of years.

life span icon

2. Extended Time of Usage

Geothermal systems are likely to outlast conventional systems, mainly since they are below ground level. You can expect your geothermal heating and cooling equipment to last for 20–25 years. Heating equipment will generally want to be replaced after 15 years.

free hot water icon

3. No Charge for Hot Water

Geothermal creates no-cost hot water. It can reduce your power use of hot water up to 60%. Your exact savings will be determined by your household size and the amount of hot water your family utilizes.

Not only does the system produce hot water, in many situations it makes “more than free” hot water. This means the equipment actually becomes more cost-effective when generating hot water.

heating and cooling icon

4. Combined Geothermal System

Geothermal heating and cooling equipment can heat and cool your home. You won’t desire an air conditioner outside or independent heating unit in the house, unless you dwell in a frigid climate. A split heating system is available for parts of the country where weather conditions commonly drop below 32 degrees.

humidity control icon

5. Improved Moisture Coordination

Geothermal sustains approximately 50 percent relative inside dampness, causing it to be quite effective in muggy rooms.

safe icon

6. Improved Preventive Measures

Since geothermal doesn’t require combustion to supply warmth, you don’t have to be concerned about gas leaks or carbon monoxide.

low maintenance icon

7. A small amount of Servicing

There is less maintenance involved with a geothermal system since there is no outside geothermal equipment. This makes it less subject to failure during hot summers. Since it doesn’t depend on outdoor temperatures, no defrost controls are needed like a conventional heat pump.

quiet icon

8. Silent Operation

Geothermal is the same as anything else you buy in life. Spending a small amount at this time normally indicates you get a small amount in return. Well-built and properly hooked up geothermal units will provide you many months of peaceful operation.

Kinds of Geothermal Equipment

Open and closed geothermal loop systems

There are two standard styles of geothermal equipment: open loop and closed loop.

As these loops are located under the surface, initial placement will affect your backyard. However, the loops won’t be seen after the grass has filled out.

Open Loop Geothermal

Open loop geothermal uses groundwater to transport warmth. It can be arranged to function with a well, pond or lake.

This equipment is typically the most energy efficient thanks to consistent groundwater conditions. However, it’s not always possible due to a lack of groundwater or extreme amount of iron in the groundwater. Local code may also not allow these systems in your town.

Closed Loop Geothermal

Closed loop geothermal utilizes a continuous loop to move water (or antifreeze solution for frigid climates) to the earth and return it to the geothermal heating and cooling equipment. The water is redistributed in a pressurized pipe rather than incorporating extra water.

There are various placement choices, including horizontal, slinky and vertical.

Reach Out to the Geothermal Heating and Cooling Experts at Three Rivers Heating & Cooling

Geothermal equipment is a strong improvement in your home. But choosing the best equipment and right company to hook up the equipment can seem like a confusing undertaking. At Three Rivers Heating & Cooling, we find it to be simple with expert help from our heating and cooling masters.

Give us a call at 503-213-4433 or contact us through our website to get underway as soon as possible.

CALL TODAY 503-213-4433